| Subject | Text |
| [quote:b54fb7477b="vtech"]Not familiar with the specific unit, some mechanism loop basics to check |
| denon udm3 | I have the exact same error, tray doesn't eject, no motors run, all other functions seem OK. If CD |
|
|
| Fan Repair | Recently somehow my room fan stopped working for no reason. So i opened it up and found this weird l |
| The 2SK4033 MOSFET is a logic-level MOSFET with a maximum drain-source voltage rating of 60V and a m |
| LCD Ribbon Cables AWM 2896 30V 80C VW-1 | The part is a "ribbon cable" for an lcd monitor...ribbon made by Youngshin (AWM 2896 30V 80C VW-1). |
| 50MP1 blank screen with backlight, green light stays on | Hi Plasma TV experts,
I have a 50MP1 that powers on, there is one bright color line show up on t |
| Thoughts on sony bravia KLV-S40A10 - power issues - advice | I've done afew repairs in the past to random stuff like motherboards, sound systems and lcd monitors |
| Sanyo JA226 Amplifier Service Manual | Anyone have this service manual. This is one of those integrated stereo systems. It was bought aroun |
| Woofer replacement | When measured with an Ohm meter 6.5 Ohms is the DC resistance of the speaker. This places it safely |
| Sony KV-35V45, Bad CRT. Looking for short... | Hi. I tought i would start a new topic, since i've focused my problem and my questions are different |
| NEC PX-42VP1G or 42PD1 or 42PD2 | hello. I have a problem with Power Board - not work at all. I changed the main Mofset and and check |
| On closer look, obviously the spindle is of a different type that I originally thought. (Hall effect |
| More Tips | I almost forgot, if the unit is belt driven in any way, check to make sure said belts aren't worn or |
| If you have no picture but sound, 24 volts going to the panel and the 5 volt inverter on, bad panel |
| Viewsonic n2750w turns on for split second then goes bla | Hello all
I just recently had a viewsonic n2750w vs10576-1m have back light problems.
when i tur |
| KRK Systems, LLC.
3000 SW 42nd Street
Hollywood, FL 33312
Phone: +1 954-316-1580
Fax: +1 |
| How do you store all your product manuals? | Until now, I've been using a classic 3-ring binder to store all the user manuals of my electronic pr |
|
|
| Unless you are simply too far away or somehow located within a shallow canyon,(very unlikely no doub |
| [quote:8046c12511="Anonymous"]Have you checked the horizontal output transistor for shorts?[/quote:8 |
| Beko 22.1 | I have a beko 22.1 chassis where 12V source (LD1086V) is running very hot. LD1086V is turning hot ve |
| Re: Surge protector necessary???? | I don't use one. I think it depends on what the other poster mentioned.
If you have an industrial |
| Aha, I see now... It's been a while. All this time I thought the BA Ic was included on the terminal |
| part numbers.... | Hi Minnie,
I didn't know about "partstore". Their prices are good. If they are listing |
| Hi,
As previously said, you will have a problem on the inverter board, responsible for stepping u |
| L32HDTV10A Sound but No Picture Problem Solved | Royalman,
I replaced the LCD Inverter Board on my L32HDTV10A and my problem was solved. I now ha |
| Sony FH-411R Picture | Pls refer to below link for pic of the hifi system. System's abt 8yrs old but still sounds great... |
| I had the same problem. Struggled for weeks. I posted on forums, downloaded service repair manuals |
| Lancia code audio | Please Lancia code audio
*2580EC025108136*
Typ:IDIS
Model ?:BE2580
Serial ?:25108136
12Volt E |
| panasonic with px1 chasis | can u help me with my board with B+ 41V and on and off relay
no oscillation on HV? |
| AVR7000 HK surround problems | Hello all,
I am loate to bring back a zombie thread, but well my amp turned into a zombie so I figu |